Optische Veränderungen in Homogenisaten SO2-geschädigter Fichtennadeln

Filtrates of spruce needles (Picea abies (L.) Karsten) have been analysed spectrophotometrically. The filtrates show u.v. absorption maxima in the wavelength range of 263 to 277 nm, which is caused by phenolic compounds present in the spruce needles. Special attention is paid to p-oxyacetophenone, both as an aglycon (λ_max, 275 nm) and as the glycoside Picein (λ_max, 263 nm). The position of the maximum of u.v. absorption depends on both seasonal and external influences (for example SO₂) on the spruce needles. Comparison of the maxima of u.v. absorption for exposed and non-exposed needles during the summer reveals significant differences which can be used as an additional aid to diagnose gas damages by air pollutants.     

Amidoamine calix[4]resorcinarene-based oligomers and polymers as efficient sorbents of azo dyes from water

The sorption behaviour of three kinds of macrocyclic sorbents – amidoamine tetradodecyloxyphenylencalix[4]resorcinarene 1 and tetramethyloxyphenylencalix[4]-resorcinarene 2; composition of calix[4]resorcinarene 1+2, and novel P.1 and P.2 polymers with amidoamine calix[4]resorcinarene units towards three water-soluble azo dyes – methyl orange (MO), acid orange (AO5) and Congo red (CR) was studied. All sorbents form supramolecular complexes with the aforesaid dyes. The best sorbent for MO was shown to be polymer P.1, for the AO5 – composition 1+2 and for the CR – macrocycle 2, with high sorption capacities (373, 497 and 625 mg/g, respectively). The main factor in the binding of dyes by all studied sorbents proved to be surface electrostatic interactions. In addition to the Coulomb interactions, the most important factor for the polymers appeared to be the ‘net’ structure of the polymer with a high concentration of binding sites, providing electrostatic, hydrogen, dipole–dipole and hydrophobic interaction. Hydrophobic substituents in the sorbents exert a significant influence on the dye sorption. The increase of the sorbents' hydrophobicity leads to a lower sorption capacity for MO and CR and a higher sorption capacity for AO5. It was shown that sorption efficiency of the sorbent depends on the ‘dye–sorbent’ structure conformity.     

Liquid chromatography with diode array detection and multivariate curve resolution for the selective and sensitive quantification of estrogens in natural waters

Following the green analytical chemistry principles, an efficient strategy involving second-order data provided by liquid chromatography (LC) with diode array detection (DAD) was applied for the simultaneous determination of estriol, 17β-estradiol, 17α-ethinylestradiol and estrone in natural water samples. After a simple pre-concentration step, LC–DAD matrix data were rapidly obtained (in less than 5 min) with a chromatographic system operating isocratically. Applying a second-order calibration algorithm based on multivariate curve resolution with alternating least-squares (MCR-ALS), successful resolution was achieved in the presence of sample constituents that strongly coelute with the analytes. The flexibility of this multivariate model allowed the quantification of the four estrogens in tap, mineral, underground and river water samples. Limits of detection in the range between 3 and 13 ng L⁻¹, and relative prediction errors from 2 to 11% were achieved.     

Determination of endosulfan isomers and their metabolites in tap water and commercial samples using microextraction by packed sorbent and GC–MS

A simple, rapid, accurate and sensitive method using microextraction by packed sorbent (MEPS) followed by GC–MS has been pursued for the determination of organochlorine insecticide endosulfan isomers (α and β) and their metabolites (ether, lactone and sulfate). MEPS is a miniaturised version of SPE employing C₁₈ packing material. It is very efficient technique as it employs as low as 10 μL of sample volume. The distinct feature of MEPS is the magnitude of the elution volume that could be directly injected to GC system. Various parameters such as extraction cycles, washing solvent, elution solvent, elution volume and pH, which influenced the MEPS performance, were tested and optimised. The calibration curves were obtained in the concentration range 1–500 ng/mL. The results showed a close correlation coefficient (R² > 0.991) for all analytes in the calibration range studied. The LOD and LOQ obtained for GC–MS under selected ion monitoring acquisition are between 0.0038–0.01 and 0.0125–0.033 ng/mL, respectively. The developed method is applicable for the quantification of these compounds in tap water and commercial samples. This method has been shown to be selective as no interferences from endogenous substances were detected by analysis. This method not only decreases sample preparation time but is cheaper, eco‐friendly and easier to perform compared to traditional techniques.     

Over-pressure TLC variant on a plate with an enclosed sorbent layer

An over-pressure TLC variant with an enclosed sorbent layer and forced flow of the mobile phase was suggested. A simple new type device for its realization was developed.Translated from Izvestiya Akademioi Nauk. Seriya Khimicheskaya, No. 3, pp.771–773, March, 1996.     

Multifunctional sorbents for the extraction of pesticide multiresidues from natural waters

In this work multifunctional sorbents, based on surfactant-coated mineral oxides, are assessed for the simultaneous extraction/preconcentration of pesticide multiresidues from aqueous environmental samples. Seventeen pesticides, representative of all the common groups (triazines, phenylureas, carbamates, azols, anilides, chloroacetanilides, organophosphorous, phenoxyacids, aryloxy acids and phenols), are selected for this study. The sorbents assessed are pure sodium dodecyl sulphate (SDS) and mixed tetrabutylammonium (TBA)-SDS hemimicelles and/or admicelles adsorbed onto alumina. Because of their multifunctional character, these sorbents provide different retention mechanisms (i.e. hydrophobic, ionic and/or π-cation interactions), which highly contribute to the efficient retention of pesticides with different polarities and acidities (bases, neutrals and acids). In addition, the low volume of eluent required for complete elution of analytes (typically 1-2 mL) avoided the need of using time-consuming and tedious evaporation steps that generally are needed when cross-linked polymeric resins or carbon materials are used as sorbents. The performance of two sorbents, i.e. SDS and TBA-SDS mixed hemimicelles/admicelles, for the admicellar solid-phase extraction (ASPE) of pesticide multiresidue was comparatively investigated. The latter was selected on the basis of the higher breakthrough volumes permitted, the lower volume of eluent required and the higher sample and eluent flow rates allowed. The proposed ASPE/LC/UV approach provided detection limits lower than 100 ng L⁻¹ for the determination of the 17 pesticides tested. Recoveries from spiked (at the ng L⁻¹ level) river and underground water samples was quantitative for most of the pesticides tested.     

An overview of lipid membrane supported by colloidal particles

In recent years, original hybrid assemblies composed of a particle core surrounded by a lipid shell emerged as promising entities for various biotechnological applications. Their broadened bio-potentialities, ranging from model membrane systems or biomolecule screening supports, to substance delivery reservoirs or therapeutic vectors, are furthered by their versatility of composition due to the possible wide variation in the particle nature and size, as well as in the lipid formulation. The synthesis, the characteristics, and the uses of these Lipid/Particle assemblies encountered in the literature so far are reviewed, and classified according to the spherical core size in order to highlight general trends. Moreover, several criteria are particularly discussed: i) the interactions involved between the particles and the lipids, and implicitly the assembly elaboration mechanism, ii) the most suited techniques for an accurate characterization of the entities from structural and physicochemical points of view, and iii) the remarkable properties of the solid-supported lipid membrane obtained.     

Sorption characteristics and chromatographic separation of gold (I and III) from silver and base metal ions using polyurethane foams

The influence of different parameters on the sorption profiles of trace and ultra traces of gold (I) species from the aqueous cyanide media onto the solid sorbents ion exchange polyurethane foams (IEPUFs) and commercial unloaded polyurethane foams (PUFs) based polyether type has been investigated. The retention of gold (I) species onto the investigated solid sorbents followed a first-order rate equation with an overall rate constant k in the range 2.2-2.8 ± 0.2 s⁻¹. The sorption data of gold (I) followed Freundlich and Langmuir isotherm models. Thus, the a dual-mode of sorption mechanism involving absorption related to “weak base anion exchanger” and an added component for “surface adsorption” seems the most likely proposed dual mechanism for retention profile of gold (I) by the IEPUFs and PUFs solid sorbents. The capacity of the IEPUFs and PUFs towards gold (I) sorption calculated from the sorption isotherms was found to be 11.21 ± 1.8 and 5.29 ± 0.9 mg g⁻¹, respectively. The chromatographic separation of the spiked inorganic gold (I) from de ionized water at concentrations 5-15 μg mL⁻¹ onto the developed IEPUFs and PUFs packed columns at 10 mL min⁻¹ flow rate was successfully achieved. The retained gold (I) species were then recovered quantitatively from the IEPUFs (98.4 ± 2.4%, n = 5) and PUFs (95.4 ± 3.4%, n = 5) packed columns using perchloric acid (60 mL, 1.0 mol L⁻¹) as a proper eluating agent. Thiourea (1.0 mol L⁻¹)-H₂SO₄ (0.1 mol L⁻¹) system was also used as eluating agent for the recovery of gold (I) from IEPUFS (95.4 ± 5.4%, n = 3) and also PUFs (93.4 ± 4.4%, n = 3) packed columns. The performance of the IEPUFs and PUFs packed columns in terms of the height equivalent to the theoretical plates (HETP), number of plates (N), and critical and breakthrough capacities towards gold (I) species were evaluated. The developed IEPUFs packed column was applied successfully for complete retention and recovery (98.5 ± 2.7) of gold (III) species spiked onto tap- and industrial wastewater samples at <10 μg Au mL⁻¹ after reduction to gold (I). The IEPUFs packed column was applied satisfactorily for complete retention and recovery (98.5 ± 2.7) of total inorganic gold (I) and/or gold (III) species spiked to tap- and industrial wastewater samples at <10 μg mL⁻¹ gold. Chromatographic separation of gold (I) from silver (I) and base metal ions (Fe, Ni, Cu and Zn) using IEPUFS packed columns was satisfactorily achieved. The proposed method was applied successfully for the pre-concentration and separation from anodic slime and subsequent FAAS determination of analyte with satisfactory results (recoveries >95%, relative standard deviations <4.0%).     

填充吸附剂微萃取技术及其在微小体积样品萃取应用中的研究进展

微萃取技术是分析化学领域发展迅速,且已经得到广泛应用的样品前处理技术。填充吸附剂微萃取(MEPS)是一种微量固相萃取技术,使用微量的吸附剂填充于微量注射器,通过反复抽推方式使样品多次流经吸附剂以完成样品吸附萃取过程,萃取后的样品可直接用于色谱分析。典型的MEPS萃取设备包括MEPS注射器和MEPS吸附床(BIN)。MEPS优化的主要因素为MEPS处理过程的参数,包括样品流速、样品量与样品萃取循环次数,吸附剂及淋洗、洗脱溶剂的种类和体积,还需要考虑样品基质对MEPS性能的影响和样品残留和重复使用问题。MEPS中最重要的部分是吸附剂,主要有商品化的MEPS吸附剂,包括硅基的Silica、C18、C8等,碳材料的Hypercarb和聚苯乙烯聚合物类的SDVB、HDVB吸附剂等。研究用的吸附剂包括分子印迹材料、限进分子印迹材料、碳基材料、导电聚合物类材料、改性硅基材料及共价-有机骨架材料等。MEPS结合多种分析仪器已经成功应用于从不同基质中提取单一或多种分析物,所涵盖基质包括生物样品(尿液、唾液、血浆或血液)、河流水体或生活污水以及几种食品和饮料。MEPS处理复杂生物基质样品时,通常需要稀释样品、除蛋白质等预处理。MEPS具有需要样品体积小、操作快速等特点,在生物基质样品分析中有望得到更广泛的使用。在环境样品中,该技术可与现场便携仪器联用,未来将有望在现场进行快速检测,并于易分解样品等方面发挥作用。